The AIR+ Active Mini Fan was developed for use with AIR+ Smart Mask dust masks with a valve. It functions as a rechargeable micro fan that effectively draws exhaled air out of the mask to reduce moisture, heat and the build-up of carbon dioxide.

The fan weighs only 19 grams and attaches directly to the mask’s valve, where it locks with a simple twist. It is equipped with an easy on/off switch, making it simple to operate in daily use.

By reducing the relative humidity inside the mask by up to 40% and the temperature by up to 4°C, the device contributes to a more comfortable working experience. At the same time, it helps prevent the build-up of CO₂, which can reduce the risk of headaches and discomfort.

The fan is powered by a rechargeable battery that provides an operating time of about four hours per charge. It is charged via the included Micro-USB cable and can be recharged in about one and a half hours.

The Metabo AV 18 is a battery-powered fan that enables ventilation and air circulation without a power connection. It is compatible with all Metabo 18V Li-Power and LiHD slide-on batteries, making it ideal for use in locations without mains power.

The fan features a robust metal cage that ensures a high air volume with minimal turbulence. The cage can be tilted so that the airflow can be directed in the desired direction, and there are three different air speeds to choose from, depending on requirements.

The construction consists of a sturdy tubular frame and rubber feet that ensure stability during operation. An integrated mounting plate allows the fan to be attached to a tripod or wall, increasing the flexibility of use.

The operating time can be up to about seven hours when using a 5.2 Ah battery, and the fan is designed for quiet operation even at maximum speed.

The Wahoo Kickr Headwind was developed to provide a more authentic outdoor cycling feel when you train indoors. The fan is shaped and positioned so that the airflow hits the body in the same way as the wind when riding on the road.

A built-in sensor can automatically adjust the fan speed to your speed or heart rate, making the experience more dynamic. Alternatively, you can choose between four manual speed levels if you want full control.

The device can be connected via ANT+ to your home trainer, heart rate monitor, or speed sensor, or via Bluetooth to a smartphone through which you can control the fan using an app. The maximum wind speed is 48 km/h, providing a strong and targeted airflow.

The Kickr Headwind is robustly built and requires minimal maintenance. It can easily be wiped down with a damp cloth after use and updated wirelessly with new software if needed.

Fresh Pax Calima white is a multifunctional fan that is ready for use immediately after installation. It operates automatically using humidity and light sensors and adjusts operation in three speed levels to ensure a comfortable indoor climate.

The fan can be expanded with app control via Pax Wireless, providing access to additional functions such as heat transfer, calendar control, boost mode, and ventilation function. This allows ventilation to be adapted to individual needs and daily routines.

The unit is equipped with a built-in multipole switch and has been designed as a discreet and efficient solution for bathrooms, utility rooms, or other spaces where humidity control is important.

The Milwaukee M12 AF-0 is a battery-powered fan that delivers an airflow of up to 12.4 m³ per minute. It is equipped with three speed settings, allowing the user to adjust the airflow as needed. The fan has a blade diameter of 150 mm and can generate a maximum airspeed of 600 m/min.

The head can be rotated 360 degrees, providing flexibility in the direction of airflow. The device can be mounted or hung in various ways thanks to integrated magnets, keyholes, hooks, and through-holes.

The fan has a runtime of up to two hours at maximum speed when used with an M12 REDLITHIUM 3.0 Ah battery. It is lightweight and compact, making it easy to transport and use in various work situations.

The M12 AF-0 is part of Milwaukee’s M12 series and is compatible with all M12 batteries. It is supplied without battery and charger.

The Airrex Ecocooler Rex48000 has been developed for efficient cooling of large rooms, halls, and workshops. It uses evaporative cooling, where air passes through moist cooling pads, thereby lowering the temperature in an energy-efficient way.

The cooler is equipped with a maximised propeller and an integrated UVC lamp that helps reduce bacterial growth in the water. It also has a large water tank with a capacity of 230 litres and a water level indicator, making it easy to monitor the water level.

The unit is made with a robust PE frame and mounted on wheels, making it easy to move despite its weight of 185 kg. It features an automatic water inlet as well as practical hooks for the water hose and power cable, making daily handling easier.

With an airflow of 48,000 m³/h and a variable speed of up to 660 revolutions per minute, the cooler can be adjusted to different needs. It operates on 230 V and has a maximum power consumption of 1100 W, offering a good balance between performance and energy consumption.

The Dell High Performance fan unit is an original fan unit designed for 16th generation PowerEdge servers. It is intended for customer installation and serves as a central component in the server's cooling system.

The unit helps dissipate heat from the system's internal components such as processors, memory, and drives, contributing to stable operation and extending the server's lifespan.

The fan unit is compatible with several models in the PowerEdge series, including R760, R760xs, R7615, and R7625, and is designed for easy replacement in existing systems without special tools.

The Beurer LV200 Towerfan Fan Tower is designed to create pleasant air circulation in the home. It has three fan speeds and three programmes – Basic, Nature and Sleep – which allow the airflow to be adjusted according to need and time of day.

The fan has a 50-degree oscillation function that helps distribute air evenly throughout the room. The integrated LED display shows the room temperature and the selected settings.

A timer function allows the operating time to be set from 1 to 15 hours, making it suitable for both day and night use. The noise level varies between about 43 and 58 dB, depending on the speed.

With its sleek white design and compact dimensions of 14 × 14 × 92 cm, the model fits into most rooms where fresh air is desired without the need for large appliances.

The NORTH Desk Fan 30cm Satin Chrome is a classic desk fan designed to create a pleasant airflow at home or in the office. It is equipped with a 35 W motor that can be set to three speeds – low, medium, and high – allowing the airflow to be adjusted as needed.

The fan features four blades that ensure even and efficient air movement. The integrated oscillation function distributes air throughout the room, while the tilt function allows for more precise adjustment of the airflow direction.

The satin chrome design gives it a timeless appearance, and the metal-based protective grille prevents contact with the rotating blades during operation. The combination of functionality and classic looks makes the model suitable for both modern and traditional environments.

The Sundström Fan Package SR 500/SR 570 consists of the filtering motor unit SR 500 and the SR 570 shield. The system is designed to provide the user with a stable positive pressure in the breathing zone, preventing the ingress of particles and other contaminants.

The SR 500 motor unit is lightweight and ergonomically designed, making it comfortable to wear even for extended periods. It is operated with a single button and offers two airflow rates of 175 and 240 litres per minute. The airflow is automatically regulated to maintain a constant flow, even when the filters begin to clog.

The device is powered by a removable lithium-ion battery that can be quickly recharged and provides up to 13 hours of operating time. The system features a built-in alarm with vibration, sound, and light that warns of low battery or reduced airflow.

The SR 570 shield protects both the face and crown and features a flip-up visor made of impact- and scratch-resistant polycarbonate. It is equipped with an adjustable head harness, air ducts for comfort, and a standard mount for ear defenders. The air supply keeps the visor fog-free during use.

The package includes the motor unit, standard battery, belt, filter adapters, particle filters, pre-filters, pre-filter holders, flow meter, and charger. The hose is not included, as it is supplied with the respective facepieces.

The system is approved according to EN 12941:1998, EN 12942:1998, EN 166:2001, and EN 812:2012 and meets the requirements for IP67 protection.

THERMEX Control 5-STAGE for nordik is a transformer-based control unit that allows the fan speed to be regulated in five fixed stages. It is intended for use with fans from the Thermex Nordic series.

The control is designed to operate one fan per unit and allows the user to adjust the air volume as needed. The stepwise control makes it easier to find a suitable balance between ventilation performance and noise level.

The device is suitable as an accessory for the Nordic Evolution models and can be integrated into existing ventilation installations where manual control of operation is desired.

The Sensotek ST 200 Mini Tower Fan is designed as a compact and space-saving solution for personal cooling. The vertical construction makes it ideal for use on a desk, in the bedroom, or in other places where discreet air circulation is desired.

The fan has three speed settings, allowing the airflow to be adjusted as needed. An integrated oscillation function distributes the air evenly throughout the room, and operation is via a simple control panel located on the top of the unit.

With a power output of around 40 watts and a noise level of up to 52 dB at a distance of one metre, the ST 200 offers a balanced combination of performance and quiet operation. Its compact size and low weight make it easy to move and position as needed.

The HP E - redundant fan kit is a fan set designed for HPE ProLiant ML110 Gen11 servers. The set enables redundant cooling, meaning the system can maintain proper temperature control even if one of the fans fails.

With a compact design of 39.4 cm width, 11.1 cm depth and 26.4 cm height, and a weight of 1.5 kg, the set is adapted to the internal design and airflow of the server. It helps protect components from overheating and extends the server’s lifespan.

The solution is aimed at professional users and data centres where stable operation and efficient heat dissipation are required to maintain system performance and security.

The Swim & Fun fan for blower is an original spare part used to replace the fan in the blower unit of the heat pump. It is designed to fit precisely on the HEAT Booster ECO 5.5 kW, ensuring optimal airflow and efficient heat transfer.

The fan is intended for use in the outdoor unit of the heat pump, where it helps to move air through the heat exchanger. A properly functioning fan is crucial for the performance and energy efficiency of the heat pump.

Replacement can be carried out using the included manual, which describes the procedure step by step. The product is supplied as a single spare part without additional accessories.

The Duka Ventilator Pro 32TH is a compact and efficient fan designed to ensure a healthy indoor climate in rooms with high humidity. It is equipped with both humidity and time control, meaning it can automatically start when the humidity level rises and then continue running for a preset time.

The fan features ball bearings that contribute to a longer lifespan and stable operation over time. With an air capacity of 185 m³/h and a noise level of 32 dB(A), it provides effective ventilation without unnecessary noise.

The white front and 125 mm diameter make it suitable for discreet installation in a wall or ceiling, where it naturally blends into the room design.

The KGK Fan Tyfon 3000 is a lightweight high-performance fan designed for the efficient transport of air and construction dust. It can be used alone or in combination with dehumidifiers to speed up the drying of buildings and water-damaged areas.

The fan is designed for durability and operational safety. The robust construction and stackability make it practical to use and easy to handle on the construction site.

With low weight and double overload protection, the model is suitable for demanding environments where continuous operation and minimal maintenance are important factors.

The maximum air volume of 2600 m³/h and an air pressure of 300 Pa ensure efficient air circulation, while the maximum cable length of 38 metres provides flexibility in placement during use.

The Master Blower BL6800 is a powerful fan designed to move large volumes of air efficiently. It operates on 240 volts and has a capacity of 2200 cubic metres per hour, making it suitable for extraction, drying, or ventilation in larger spaces.

The fan comes with a 7.6 metre air hose, allowing the airflow to be directed precisely where it is needed. The combination of high air volume and flexible hose makes it practical in many work situations.

The construction is robust and designed for professional use, where reliability and efficiency are important factors. The unit is built to withstand demanding conditions and deliver stable performance over time.

The Ruckus Wireless network device fan tray is a fan tray designed for use in Ruckus network devices. It acts as a central part of the device’s cooling system and helps maintain a stable operating temperature under load.

The fan tray is hot-swappable, meaning it can be replaced without interrupting the operation of the network device. This makes it ideal for environments where uptime is critical and maintenance must be carried out quickly and efficiently.

With its design specifically developed for Ruckus devices, it ensures compatibility and reliable performance in professional network installations.

The Maico MURO120 Plus HT is a wall and ceiling fan that combines efficient air exchange with a discreet and compact design. It was developed for installation in short ducts, making it ideal for smaller rooms where quick and reliable ventilation is desired.

The fan is equipped with a built-in humidity sensor that automatically activates the device when the humidity exceeds a certain level. In addition, it has an adjustable run-on timer that can be set between 3 and 25 minutes, allowing ventilation to continue briefly after use.

With a capacity of 180 m³/h and protection class IP X4, the model is suitable for humid environments such as bathrooms. The white colour and simple design ensure that it fits into most modern interiors.

Fresh Intellivent SKY is an intelligent fan designed for bathrooms, toilets, and utility rooms where effective ventilation is required. It is equipped with sensors that automatically adjust the ventilation to the room’s humidity and odour levels.

The fan features a unique odour sensor that detects strong smells and increases the speed to quickly clean the air. At the same time, the self-regulating humidity control ensures that the fan starts automatically when humidity rises and stops again when the level is normal.

A built-in light sensor allows the fan to respond to movement and activity in the room, while an air exchange programme ensures fresh air even when it has not been used for a long time.

Operation is via a discreet touch panel that is only activated by touch, or via a Bluetooth connection through the 'Fresh Ventilation' app, where settings can be adjusted as needed.

The fan is designed for easy installation both in the wall and on the ceiling and can be used in ducts with 100 mm and 125 mm. It is manufactured in Sweden and comes with a 5-year warranty.

The Milwaukee M18 AFG2-0 is a compact and robust fan designed to deliver efficient air circulation in various work situations. It features an adjustable head that can rotate up to 300 degrees, allowing the airflow to be directed exactly where it is needed.

The fan is equipped with variable speed and a 180 mm fan that can move up to 1,444 m³ of air per hour. This allows the user to adjust the airflow as needed – from light ventilation to stronger air movement.

The design is compact and includes an integrated carrying handle, making it easy to transport between work sites. It can stand freely, be wall-mounted through holes in the base, or hung using the side holes.

The M18 AFG2-0 is compatible with Milwaukee’s PACKOUT™ system and can be powered either by an M18™ REDLITHIUM™ battery or via the included AC adapter. With a 5.0 Ah battery, it can run for up to three hours at maximum speed.

The THERMEX Duct Fan TD500/160 is a compact ventilation unit designed for efficient extraction in smaller rooms such as bathrooms and toilets. It can be mounted on the ceiling and connected to ventilation ducts or flexible hoses, making it flexible in installation.

The fan is made of thermoplastic and has an IP44 protection rating, meaning it is protected against moisture and splashing water. The built-in motor is equipped with ball bearings and a thermal fuse, contributing to stable and safe operation over time.

With an airflow of up to 580 m³/h and a maximum noise level of 33 dB, the model provides efficient yet quiet ventilation. It can be operated at different speeds and is suitable for both horizontal and vertical installation.

The TD series from Thermex is known for being easy to disassemble for cleaning without having to remove the duct, making maintenance simple and practical.

The Sensotek Tower Fan with Tilt Function ST800 is a vertical fan designed to create a pleasant airflow in the home. It has a sleek and modern appearance, making it easy to place in various rooms without taking up much space.

The fan offers three speed levels and three different fan programmes, allowing the air circulation to be adjusted as needed. An integrated timer function makes it possible to set the operating time, which is particularly convenient for use at night or during periods when automatic shut-off is desired.

The tilt function allows the airflow direction to be adjusted, enabling more targeted ventilation. The combination of features makes the model suitable for both everyday use and hot summer days when an even and cooling airflow is desired.

HP E Front to Back Airflow Fan Tray is a fan tray designed to maintain proper airflow in the HPE 5900AF-48XGT-4QSFP+ switch. It directs air from the front to the back of the device, helping to keep the temperature stable in densely packed rack environments.

The device is hot-swappable, meaning it can be replaced without interrupting the operation of the switch. This makes maintenance and replacement quick and easy while maintaining system availability.

The fan tray is an important component in network infrastructure where efficient cooling is crucial to ensure reliable performance and extended equipment lifespan.

The Milwaukee M18™ High Performance Fan is designed to ensure effective air circulation both in workshops and on construction sites. It features three speed settings that allow the airflow to be adjusted as needed, with a maximum air movement of up to 5,775 m³ per hour.

The fan has an adjustable head that can rotate 360°, allowing the airflow direction to be easily adapted to different work areas. The compact design and integrated carrying handle make it easy to transport and place wherever ventilation is needed.

Rubber feet provide stability and protect surfaces from scratches. The unit can be powered either by an M18™ REDLITHIUM™ battery or via mains power, offering flexibility in use. With a 5.0 Ah battery, the fan can run for up to nine hours on a single charge.

The fan is compatible with all MILWAUKEE® M18™ batteries, making it a practical part of an existing Milwaukee system.

The Thermex EDM100Z is an exhaust fan designed for efficient ventilation in small rooms such as bathrooms, toilets, and other areas requiring moisture and odour control. It can be mounted both on the ceiling and through the wall, offering flexibility in installation.

The fan is made of robust ABS plastic and equipped with ball bearings that contribute to a longer lifespan and stable operation. The double insulation increases safety, while the IPX4 rating protects against moisture and splashing water.

With an airflow of 95 cubic metres per hour and a sound pressure level of 40 dB, the EDM100Z provides quiet and efficient extraction. It is suitable for continuous operation and requires only minimal maintenance.

The design makes it ideal for both new installations and replacing existing fans when a reliable and discreet solution is desired.

The Sensotek ST 800 is a tower fan designed for efficient ventilation both at home and in the office. It features a slim design with an exclusive aluminium panel, making it suitable for rooms where both function and aesthetics are important.

The fan offers three ventilation speeds and three airflow modes – Normal, Natural and Night Breeze – allowing the airflow to be adjusted according to need and time of day.

A built-in oscillation function ensures even air distribution in the room, while the tilt function allows the fan to be angled at 0°, 6° or 12°, enabling more precise adjustment of the airflow direction.

The ST 800 is equipped with an LED display and a timer function of up to 7.5 hours. It comes with a remote control for easy operation, but requires two AAA batteries, which are not included.

With a power output of around 40 watts and a height of 103 cm, the model combines energy efficiency with good performance in a compact format.

The HP - fan is an original fan developed for the HP EliteBook 830 G5 notebook. It serves as a central component of the computer’s cooling system and helps maintain a stable temperature during operation.

The fan is designed to fit precisely into the specified model and provide the necessary airflow to prevent overheating of internal components. As an original spare part, it ensures optimal performance and compatibility with HP hardware.

The product is suitable as a replacement for a defective or worn-out fan in the EliteBook 830 G5 and can help extend the computer’s lifespan by ensuring proper heat dissipation.